Contacts
Address
Philippines, Calabarzon (IV-A), Los Banos, Brgy.Bario Masaya Rosario Batangas City 4200
Director
manager
Phones of enterprise
management
+63
When placing an order please inform the manager that you've learned the information on Allbiz! Thank you that you buy on Allbiz!
Internet
Site:
About enterprise
Puyat Steel, Corporation
Puyat Steel Corporation was established in 1956 as a division of Gonzalo Puyat and Sons, Inc. The company set-up the first galvanizing plant in the Philippines in answer to the need of the country for galvanized iron sheets to be used in construction, building and roofing materials.
Puyat Steel Corporation, in its continued commitment to innovation, has established the first-ever-state-of-the-art continuous galvanizing line. This new plant wasl allowed the company to offer superior quality galvanized sheet and coils using the modern technology of a non-oxidizing furnace.
In stock
Nominal Thickness Available : 0.4, 0.5, 0.6 mm
Tensile Strenght :/ Annealed = 40,000 psi or 275 Mpa (Minimum)
Nominal Width : 0.813m (915), 1,080m (1220)
Paint Coating System : 1. Conversion Coating 2. Primer Coat 3. Top Coat . 4.Wash Coat or Service...
Group: Steel products
In stock
Nominal Thickness Available : 0.4, 0.5, 0.6 mm
Tensile Strenght : Full hard = 80,000 psi or 550 Mpa (Maximum) / Annealed = 40,000 psi or 275 Mpa (Minimum)
Nominal Width : 373 mm
Effective coverage : 356 mm
Paint Coating System : 1. Conversion...
Group: Steel products
In stock
Nominal Thickness Available : 0.4, 0.5, 0.6 mm
Tensile Strenght : Full hard = 80,000 psi or 550 Mpa (Maximum) / Annealed = 40,000 psi or 275 Mpa (Minimum)
Nominal Width : 0.813m (915), 1,080m (1220)
Paint Coating System : 1. Conversion Coating 2. Primer Coat...
Group: Roof Coatings
In stock
ominal Thickness Available : 0.4, 0.5, 0.6 mm
Tensile Strenght : Full hard = 80,000 psi or 550 Mpa (Maximum) / Annealed = 40,000 psi or 275 Mpa (Minimum)
Nominal Width : 1.105m
Effective coverage: 1.011m
Paint Coating System: 1. Conversion Coating 2....
Group: Roof Coatings
In stock
APO Galfan Premium Gutters are manufactured using the best hot-dipped galvanized product that assures supperior corrosion protection and a lower life-cycle cost. Double your assurance on reliability workmanship.
Group: Drainpipe systems
In stock
Base Metal : Cold Rolled Steel
Nominal Thickness Available : 0.4, 0.5, 0.6 mm
Tensile Strenght : Full hard = 80,000 psi or 550 Mpa (Maximum) / Annealed = 40,000 psi or 275 Mpa (Minimum) per JISG 3302 and ASTM 446
Temper : Hard and Soft
Substrate :...
Group: Drainpipe systems
In stock
Wood or steel frames must be in one plane.Moulding must be installed using c.w.nails for wood and blind rivets for steel
APO Spandrel must be installed using same fasteners
On Spandrel sidelaps, the tounge and groove method shall be used.
To conceal fasteners, fastening ahould be on...
Group: Steel zinced with a polymeric covering
In stock
Roof frames should be well achored.
2. Rafters and trusess should be straight, level and parallel to each other.
3. Regular spacing between rafters and trusses should be based on metal thickness and profile of roof to be installed. R Refer toTtable on Allowable Loads...
Group: Tiles
In stock
Note: Due to continuing product development product specifications are subject to change without prior notice
Handling and Storage
Panels and Accessories should be piled over wooden support at least 100mm from the ground level and with a minimum inclination of 10 degree....
Group: Tiles
In stock
Substrate : Cold Rolled Steel Complying JIS G 3141 SPCC Coated with Galfan the eutectic mixture of zinc and aluminum (95/5),complying to ISO 14788, commercial quality
Nominal Thickness Available : 0.4, 0.5, 0.6 mm
Tensile Strenght : 40,000 psi or 275 Mpa (Minimum)
...
Group: Tiles